TP Home | About | Newsletter | Blogs |

Painting door


(darlic) #1

. Hi guys got a front door to paint,need a little bit off advice,the customer wants white gloss,looking to use owatrol easy prep,this will save valuable time sanding,but not sure if it will be enough as there’s quite a bit off flacking on bottom off door, and the top part the wood is rough so may need a bit of sanding there,will I be able to use a oil based undercoat after 2 hours any recommendations want something affordable she doesn’t want to spend to much but won’s a reasonable quality paint.


(Mark West) #2

It will definitely need a rub down. As it’s only 1 door material cost is not really an issue, If I was doing it I would rub down then prime with Sikkens Rubbol Primer Plus, make good and then finish with 2 coats of Sikkens Rubbol XD Gloss.

You will only need 1 litre of each and have some spare for the next job :smile: