TP Home | About | Newsletter | Blogs |

Enviromose Pro Paint stripper

I needed to remove some paint from a wall and a wooden plaque; the latter was quite delicate, so I chose the Enviromose stripper. I can only say it isn’t very good, and based on my experience, I would not recommend it to anyone.

The instructions suggest a second coat if you remove more than six layers. I followed the instructions, and despite only having three coats to remove from the wall and two from the wood, I did apply a second coat after one hour. I then left it for 24 hours and continued with some other tasks. I returned to check, and it had bubbled in only a few areas. It did soften the paint, so I tried to scrape it off. After thirty minutes, I gave up because the paint wasn’t soft enough. I am disappointed by the product and will return to using Peel Away.