Morning all. Mid flight through building all internal woodwork surfaces with Kodrin Spachtel & sanding back to smooth. Going ok.
But in the sanding process and with the original woodwork not being the greatest, I’m baring some of the edges back to bare wood…not so much but would imagine too much for direct gloss to be a good idea…area maybe 1-2 mm by 10-15 mm here and there…thin and long on edges.
Any suggestions as to best small areas primer to use before applying 2 x gloss…areas are very small and thin.
Also advice in how to apply without spoiling the 98% that is ok would be welcomed as always. Many thanks